Welcome to Philemon Instrument
Application
It is well suited for applications ranging from flow into water treatment plants, storm and sanitary sewer systems, and effluent from water resource recovery, to industrial discharge and irrigation channels.
The meter includes a non-contact ultrasonic level sensor to detect the water level and then calculates the flow rate and volume using the related formula and characteristics of the channel.
Its unique features and IP67 rating enable
reliable performance in challenging outdoor environments.
| Power Supply | DC24V (±5%) 0.2A; AC220V (±20%) 0.1A ;Optional DC12V |
| Display | Backlit LCD |
| Flow Rate Range | 0.0000~99999L/S or m3/h |
|
The maximum of Accumulative Flow |
9999999.9 m3/h |
|
Accuracy of Change in Level |
1mm or 0.2% of full span (whichever is greater) |
| Resolution | 1mm |
| Analogue Output | 4-20mA, corresponding to instantaneous flow |
| Relays Output | Standard 2 relay outputs(Optional up to 6 relays) |
| Serial Communication | RS485, MODBUS-RTU standard protocol |
| Ambient Temperature | -40℃~70℃ |
| Measure Cycle | 1 second (selectable 2 seconds ) |
| Parameter Setting | 3 induction buttons / remote control |
| Cable gland | PG9 /PG11/ PG13.5 |
| Converter Housing Material | ABS |
| Converter Protection Class | IP67 |
| Sensor Level Range | 0~4.0m ;other level range also available |
| Blind zone | 0.20m |
| Temperature Compensation | Integral in probe |
| Pressure Rating | 0.2MPa |
| Beam Angle | 8° (3db) |
| Cable Length | 10m standard (can be extended to 1000m) |
| Sensor Material | ABS, PVC or PTFE (optional) |
|
Sensor Protection Class |
IP68 |
| Connection | Screw (G2) or flange (DN65/DN80/etc.) |
.jpg)
(3).png)
(2).jpg)
